-
Conductor: Stranded BareCopper per ASTM B-3, B-8
-
Insulation: PVC/Nylon
14AWG -.016"PVC + .05'Nylon
12 AWG -.016"PVC + .05'Nylon
-
Voltage Rating: 600 V
-
Temp. Rating: -75℃
-
Color Code: Black
Application
Traffic loop detector cable can be used in traffic signal control, used to connect detector loops to traffic control cabinets, enabling precise vehicle detection for signal timing adjustments. and ehicle Counting and Classification, Embedded in roadways or installed in traffic lanes to monitor vehicle flow and categorize vehicles based on size and weight.
Feature
IMSA 51-1 Traffic Loop Detector Cable is made of stranded bare copper in compliance with ASTM B-3 and B-8 standards, providing excellent conductivity and flexibility. Dual-layer construction with PVC (Polyvinyl Chloride) and Nylon insulation. Dual-layer PVC and Nylon insulation provide excellent abrasion resistance, chemical resistance, and moisture protection.
Certification
IMSA 20-1 traffic control cables are UL certified and meet strict industry standards for safety, durability, and electrical performance. UL certification indicates that the cable has passed rigorous testing and complies with U.S. and international electrical safety regulations.
Package
Production Line
With many years of dedicated experience in the wire and cable industry, Greater Wire's highly skilled team has developed comprehensive expertise and in-depth industry knowledge. We utilize this extensive experience to tackle even the most complex challenges, offering tailored and innovative solutions that align with the ever-evolving demands of our clients. By staying ahead of industry advancements and maintaining a commitment to excellence, we ensure that our products and services consistently meet the highest standards of quality, reliability, and performance.
customer
Partner
FAQ
Q: What is a traffic loop detector?
A: A traffic loop detector is a type of sensor used in traffic management systems to detect the presence of vehicles at intersections, traffic lights, and toll booths. It works based on the principle of inductive loop technology.
Q: How to install loop detector wire?
1. Loop detector wire (usually insulated copper)
2. Loop detector unit
3. Saw (for cutting asphalt or concrete)
4. Sealant (coil sealant or epoxy)
5. Chalk or marking tape
6. Tape measure
7. Support pole (for deeper cuts)
8. Wire ties or tape
9. Power drill (if needed)
Step-by-step installation process
1. Design the loop layout
2. Mark the loop cut line
3. Cut the pavement
4. Clean the trench
5. Install the loop wire
6. Twist the lead-in wire
7. Seal the trench
8. Connect to the loop detector unit
9. Test the loop
Hot Tags: imsa 51-1 traffic loop detector cable, China imsa 51-1 traffic loop detector cable manufacturers, suppliers, factory, H07ZZ F Cable, ul1015 hook up wire, SAA Approval SDI Cable, orange circular cable, 0 6 1KV Single Core Flexible Cable, h03vv-f
51-1 Loop Detector Cable
| NO. OF COND | OUTER JKT THICKNESS | NOMINAL O.D. | WEIGHT lbs. / 1M' |
||
| INCH | mm | INCH | mm | ||
| 14 | .026 | .660 | .115 | 2.92 | 16 |
| 12 | .026 | .660 | .135 | 3.43 | 24 |
51-3 Loop Detector Cable
| NO. OF COND |
OUTER JKT THICKNESS | NOMINAL O.D. | WEIGHT lbs./1M' | ||
| INCH | mm | INCH | mm | ||
| 14 | .030 | .762 | .133 | 3.38 | 17 |
| 12 | .030 | .762 | .150 | 3.81 | 26 |
