Aug 29, 2024

How To Choose Building Wires in Australian? Understand These,you Will Not Be Fooled

Leave a message

Circuit engineering is an extremely important step in the decoration process, and the selection of wires is also related to the safety of electricity use in the later stage. Below is a brief introduction to the commonly used specifications and model level selection precautions for home decoration wires, to help everyone better choose suitable building wires.
Australian Home Electrical Wire Specification
The home decoration wires in Australia are TP cables, and wire specifications are usually expressed in square meters. The square of the wire refers to the cross-sectional area of the copper wire. According to the different conductor structures, wires are divided into single conductor Soil TPS cables and Flexible TPS cables. For Flexible TPS cable sizes, the square of the wire is the sum of the cross-sectional areas of all copper wires.
TPS CABLE mainly has three commonly used specifications: 1.5 TPS, 2.5 TPS, and 4 TPS cables. In addition, there are 6 mm2 TPS and 10 mm TPS cables, which are mainly used as the main entrance line and are almost not used in home decoration construction.
1.5 mm 2c e tps: mainly used for lighting fixtures and switch wires
2.5 mm 2c e tps: mainly used for socket power supply and common electrical appliances
4 mm 2c e tps: It is important for high-power appliances such as circuit main lines and air conditioners. Due to the large number of kitchen appliances and high electricity consumption, a 4 tps cable is sometimes chosen.
Home decoration wire and cable selection
Check the packaging and labeling: whether the information on the certificate of conformity is complete, with "SAA" certification and quality system certification.
Check the manufacturing process: Cut a flat TPS cable and see if its core is located in the center of the insulation layer.
Check the quality of the copper core in the electrical TPS cable: high-quality copper core with a purple red color, glossy and soft to the touch; Poor quality copper cores tend to be yellow, white, or black.
Check the size of the TPS cable: Check whether the length of the wire and the cross-sectional area of the inner core are consistent with the markings to avoid situations such as missing weight or falsification.

 

1708764743122

Send Inquiry